Principle of As-300 Hall Flowmeter

Principle of As-300 Hall Flowmeter

Hall Flow Rate of 50 g metal powders AS-300 Hall Flowmeter Funnel determines flow rate by measuring the time taken by 50 gram of a metal powder to flow through a calibrated hall flowmeter funnel/orifice of standardized dimensions(0.1 inch/2.5 mm) according to International Standards.

Apparent Density of free-flowing powders AS-300 Hall Flowmeter determines the apparent density by permitting a volume or certain quantity of powder in a loose condition to flow from a hall flowmeter funnel orifice Diameter 0.1 inch/2.5 mm into a specified density cup of definite volume(25 cm³) under controlled conditions.  The mass of powder per unit volume (the ratio between the mass and the volume) is recorded and reported as apparent density.

Apparent Density of non-free-flowing powders AS-300 Hall Flowmeter determines the apparent density by permitting a volume or certain quantity of powder in a loose condition to flow from a Carney funnel diameter 0.2 inch/5.0 mm into …

steel basic classification information 2020-2021

                                           Steel classification 

                                The chemical composition of steel broadly divide them two major groups are :- 

A)  Plan carbon steel
B)  Alloy steel

Types of steel

                   A)  Plan carbon steel
                        Plain carbon steels are broadly sub - divided into four major types based on their carbon contents. These are not strict divisions based on carbon contents but are generally broad divisions as a basic of classification. This division is definitely useful. These are :-

1) soft or low carbon steel - Upto 0.15% c.

2) Mild steels - in the range 0.15 - 0.35% c.

3) Medium carbon steel - in the range 0.35 - 0.65% c.

4) High carbon steel - in the range 0.65 - 1.75% c.

Types of steel image 2020-2021

                           B)  Alloy steel
                        The alloy steels are broadly sub - devided into threee groups on the basis of the total alloying elements present. This division is also only a broad division and not a rigid one. This is :-

1) Low alloy steel - upto 5% total alloying contents. 

2) Medium alloy steels - 5 - 10% total alloying. 

3) High alloy steels - above 10% total alloying. 

The above classification of steels are useful from the point of view of steelmaking.

Related :-
materials,physical metallurgy, information, materials science,science, mining metallurgy engineering, materials engineering, physical, facebook, journal, mining, metals, chemical, metal, ferrous, category, technology, understand, showing, britannica,tata steel share price,
tata steel share ,
tata steel,
jsw steel share price,
vizag steel,
jindal steel share price,
man of steel,
jindal steel share,
jsw steel share,
steel city back office,
jsw steel,
stainless steel,
jindal steel,
bleeding steel ,
essar steel,
vizag steel plant,
tata steel recruitment 2019,
tata steel bsl share price,
bhilai steel plant,
steel authority of india.


Popular posts from this blog

Electrolysis process And reduction process information

Metallurgical Conventional Process of steel making 2020-2021

Crushing process information